Showers and Tubs.
It is always a rewarding experience to have a nice shower or a bath after a hard day’s work. Taking a long luxurious bath is one of life’s greatest pleasures. It is a healthy habit too; it helps you to sleep better, relieve cold and flu symptoms. It elevates your mood, relieves muscle pain, and keeps you clean and fresh.
What can be really torturous is when you have a tub or a shower that’s not working correctly. A quick solution to this problem is to call plumbing service such as Sedco plumbing.
There are many reasons why your tub or your shower may not be in an excellent working condition or underperforming. Let us find out more and know what the causes are, and also learn some preventive measures.
Typical shower and bathtub problems and how to prevent them.
- Clogged drain.
Tubs and shower drains can be clogged quite quickly if it is not checked from time to time. If you find yourself standing in a pool of water even after a few minutes after you’ve turned off the water, then it is probably because of the drain problem. Things like hair, soap scum, and hard water deposits may build up over time, and clog the drain.
This can be prevented by using a screen over the drain. Using a screen over a drain not only forbids the hair and soap scum from entering the drain pipe but also stops small deposits of lime, calcium, rusts or minerals. Cleaning the drain screen after every use will help you go a long way in keeping your bathroom away from potential clogs.
- Drain leak.
Shower or tub drains may leak occasionally, and it is extremely difficult to find out. The leak may be caused by a faulty seal around the drain assembly. Drain leaks can damage the bathroom flooring or adjoining rooms, and the ceiling. As a prevention measure using a trusted brand can be really helpful.
- Tubs and showers valves.
Valves have inner cartridges and can eventually wear out causing problems. It is not easy to replace them. In fact, repairing or replacing valves are extremely difficult and challenging as shower valves are usually located inside the wall.
Enlisting a professional plumber service is an ideal solution to this issue. They will carefully fix this issue and minimize your wall damage.
- Leaky faucets.
A leaky or a dripping faucet is the most common tub problem. Fortunately, this issue is easily fixed by repairing it. Initially, it may appear as a minor issue, but requires a lot of attention. A leaking faucet can cost you higher water bills and other problems. Most faucets start leaking when the rubber washers wear out.
This problem can be prevented by inspecting the faucet immediately if you notice any of these; tight handle, rust or mineral deposits on the surface, and squeaky handle.
You’re also very likely to have plumbing problems if the original contractor of your home did not install the plumbing correctly.
How to know if your tub and shower have issues.
The most common problem is a leak. A worn out washer or valve seals cause the water to leak.
You must have experienced this at least once; It’s a cold day, and you decided to take a hot rinse, then in the middle of the shower, the water turns instantly cold and sends a chilling shock all over your body. This is a sign that your shower valve needs to be replaced.
This is a common problem that occurs when another faucet in your house is turned on simultaneously. The wear and tear on your shower valve is the reason, and it becomes slow to react or slow to make the needed adjustment which is why it pumps hot water and cold water all of a sudden. Not only does it result in the inconsistency of hot water output, but a damaged or malfunctioning valve can also result in fluctuation of water pressure.
- Low water pressure.
Another indication of a bad shower valve is the sudden change in the water pressure. If you notice that the water pressure is not what it used to be, or if you see fluctuations in the water pressure, you need to replace your shower valve at once.
In some cases, water may not come out from the tub faucet; the problem may be rust or corrosion in the faucet restricting the flow of water. If you’re sure that the faucet is working fine, but the water still does not come out, call a plumber at once.
- Poor drainage.
This is another very common problem in the bathroom. You might have a pipeline that needs to be checked if you feel that your tub is taking longer time to drain. In your shower water should flow directly into the drain, it is not supposed to pool. If you notice a pool of water after the shower, something is not right with your drain.
Finding preventative measures to avoid these problems is not always feasible. The best option is to find out the issue at an early stage and seek help from a plumbing service.
Reasons why replacement of a bathtub may be necessary.
There can be a good number of why you may want to replace your tubs.
- It could be because it’s damaged and has holes or cracks.
- It is old, worn and discolored.
- You’re selling your house, and you want to add extra value.
- Or it could be simply because you saw a better tub somewhere, and you want to own it.
To do this job, you will need a professional from a trusted plumbing service. If you have any of the above tubs and showers issues, Sedco plumbing is your answer. With decades of experience, and trusted by many, for its consistency and customer friendly service, Sedco plumbing never fails to deliver 100% performance. It is well famed for its loyalty and intensive care. It is recommended by all regular clients. In fact, a lot of Sedco customers are through referrals.