It can be very annoying to have a never-ending dripping faucet or a sink that leaks. The sound of the dripping faucet can be really irritating. Not only does it disturbs the peace of mind, but a precious resource is being wasted – water. That is not all; it causes a lot of other problems too. Let us dig deeper.
Leaky faucet or sink associated problems.
That dripping sound does not only make you crazy, but it also costs you money, in the form of the water bill. Fixing your faucet can save up to 10% of the annual water bill.
If you’re concerned about climate change and you should be, you need to consider this. According to the research by the Environmental Protection Agency, more than 10,000 gallons of water is wasted due to household leaks.
It can cause a lot of stress and strain on your plumbing as well. A leaky sink can cause drain clog and floor damage. You may even have to purchase a new sink altogether when you delay the repairs.
Causes of leaky faucets.
The three most common faucets problems include:
- Worn out O –rings.
This is perhaps the most invasive problems behind a leaking sink. O-rings are rubber gaskets which seal the gap between the cartridge and other parts. A worn out O-ring causes leaks at the base.
- Broken washers.
Washers wear out over time due to repetitive motion causing slow drips.
- Faulty installation or washers or O – rings.
These are some very small parts in the faucets that work in conjunction to deliver water. Faculty installation of washers or O – rings can cause the faucet to leak or even malfunction.
Indications of problematic sinks and faucets.
A lot of people do not pay attention to some of these small and minor issues such as a dripping faucet, squeaky handle, etc. Over time these can cause significant damage and may require a replacement. There is obviously an issue with your plumbing if you notice any of these:
- Dripping faucet.
If the faucet is continually dripping, it needs to be taken care of as soon as possible. Apart from the noise and the nuisance, the water can damage the floor and also become a safety issue.
- Low water pressure.
This happens when the aerator in your faucet is clogged. In this case, your faucet will not be able to produce a nice steady stream of water.
- Noisy handle.
When the faucet’s handle is too tight or has parts that are rusting, it produces a squeaking sound. And it is not the most auditory appealing sound.
The faucet or sink is under threat if you notice rusts or minerals deposits on the surface
- Sluggish performance.
Immediately schedule an appointment with a plumber if you notice your sink is taking a bit longer than usual to drain. The reason might be a clogged drain and requires a professional’s help. This usually happens when homeowners do not use an adequate amount of water to flush the waste down the garbage disposal. Food pieces can build up in the pipe under the sink.
- Weird noises.
If your sink is making a gurgling sound when draining, it might be an indication of some faulty parts underneath.
- Damp wall or moisture.
Another clear indication of a problematic shower is moisture collection on the walls. Unless you plan to tear down the walls, it can be difficult to gauge and fix it. A plumber is best equipped to take care of this particular issue.
- Mold and mildew.
Moisture problems almost always occur in conjunction with molds and spores. It is particularly apparent if the environment is hot and humidity is high.
Are they ways to prevent sink and faucet problems?
- Regular checks.
Along with regular cleaning, it is important to inspect the faucets and sinks for faulty and malfunctioning parts. This will ensure a smooth functioning as well as arrest any problems in its initial stage.
- Use a dehumidifier.
Molds are not only nasty but can cause health problems. Inhalation of spores has been known to be the root of many health issues in children as well as adults. Employing a dehumidifier near the sinks or a cabinet will discourage mold growth. Also, when you witness a mold infestation, do not attempt to remove it yourself for safety reasons. Call a licensed professional immediately, and they will take care of it.
- Avoid bleach.
If any part of the sink or faucets or areas around it are porous to semi-porous, do not use bleach or other liquid cleaning agents. This will not only affect the performance but encourage mold growth.
- Know your cleaning materials.
The surface and the finishing are different for every sink and faucets. It is essential to understand this as it will help you take care of it better. Chrome faucets are best cleaned with baby oil and cotton ball. Sinks and faucets with the living finish only require water to be cleaned.
On the other hand, the use of abrasive materials can damage the surface and the patina of the delicate surface components. Understanding these features and how to take care of it will not only enhance their performance but extend its durability.
Why you should seek professional help.
Some of the reasons why you need to fix an appointment with a plumber are installing a new unit, regular maintenance or repair. There are a good number of DIY videos and instructions available on the internet, on how to fix or repair leaky sink and faucets. You may succeed in fixing some minor issues.
However, attempting to fix these issues by yourself may end up in disaster, and can cost you a lot of money. Also, keep in mind that, faucets have different types of designs. There are rotatory ball faucets, cartridge faucets, and ceramic disc faucets. All these different faucets function in a different way and it’s a great idea to call a plumber so he can sort it out for you. With the right tools and knowledge, a professional plumber can fix the issue efficiently and conveniently.